Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Parts

Zipp Tangente Cork Brake Pads
$40.00
Zipp's Tangente Cork Brake Pads are perfect for Zipp wheels with carbon braking surfaces. They are made of a composite cork polymer for consistent brake response and to reduce glazing from the intense heat caused by braking on carbon. As a result, the Tangente cork pads avoid the brake pulsation produced by residue buildup from rubber pads and can even eliminate pulsation from rims with previous buildup. These pads have a unique shape with more material in the front to improve durability and shed water. Although the composite material wears similarly to low-temperature rubber compounds, the Tangente cork pads last longer than most rubber carbon-specific pads because of the shape and 0.5 mm greater overall thickness.
Zipp Tangente Platinum Pro Evo Brake Pads
$45.00
Zipp's Tangente Platinum Pro Evo Brake Pads are made for wheels with carbon braking surfaces. These fine pads provide confident, smooth braking power in all conditions and they are specially made for long life. They have a large surface area for maximum stopping power and deep grooves to shed water from the rim and ensure the Evos grip great even when it's wet. These stoppers are also thin so they'll work nicely on time trial and triathlon bicycles with integrated brakes and tight clearances.
Zipp Vuka Alumina Clip Riser Kit
$25.00
Zipps' Vuka Alumina Clip Risers work with the Vuka Alumina Above-Bar Clips (sold separately) and let you raise your armrest height. They're made of sturdy, lightweight aluminum and come in 10mm, 25mm, and 50mm sizes.
Yokozuna Jet Lube Cable & Casing Set
$45.00
- Housing features the Jet Lube Process, which injects the proper amount of grease from end to end and results in 10 percent less cable drag - Premium stainless steel for greater durability - Lead and Dioxin free. Made in Japan
Wolf Tooth Components 16 Tooth Cog
$16.00
We did our homework on this cog and we think you will be pleased with the result! This 16t cog smooths out the cog to cog transition when using our GC and a standard 10 speed 11-36 cassette. You should expect this to shift well and last as long as the rest of your cassette cogs of similar size. Here are the transitions WITHOUT the 16t cog (4 tooth max jump): - Remove the 15t -> 11-13-17-19.... - Remove the 17t -> 11-13-15-19... Here are the transitions WITH the 16t cog (3 tooth max jump): - Remove 15t & 17t-> 11-13-16-19... Compatibility: Shimano 10 speed cassettes - XT 11-36t (CS-M771) - XTR 11-36t (CS-M980) - Other 11-36t Shimano cassettes like SLX HG81 11-36t - Modification required (must drill out rivets holding the 17t to the larger cogs) SRAM 10 speed cassettes - PG 1030, 1050, and 1070 - 11-36 and 12-36 - X0 11-36t(XG - 1080) - Remove the 14t rather than the 17t
Wolf Tooth Components 76 BCD Chainrings
$65.00
The Wolf Tooth 76 BCD chainrings fit any SRAM 76 BCD spider or Specialized Stout crankset. - Features Wolf Tooth's Drop-Stop tooth design for maximum chain retention - Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains - Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains - Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings - If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention - Made from 7075-T6 aluminum for long life
Wolf Tooth Components BlingKit
$35.00
Made in the USA, BlingKits add a dash of style and color to any bike in an easy to manage package. - Includes a 3mm, 5mm,10mm,15mm headset spacer and integrated 5mm top cap - Includes 2x sets of anodized to match bottle cage bolts
Wolf Tooth Components Fat Paw
$27.00
Fat Paw grips were developed for riders who crave large-diameter grips that also have a soft feel. The 9.5mm grip thickness reduces hand fatigue and finger numbness, making it an ideal option for riders with large or gloved hands. - 100% proprietary dual-density silicone compound provides excellent vibration damping and conforms to your hand for improved comfort while maintaining durability - Tacky texture provides excellent grip with or without gloves in all weather conditions - Includes bar end plugs
Wolf Tooth Components ReMote Dropper Post Lever
$70.00
The Wolf Tooth ReMote is a significant lever upgrade for cable-actuated dropper seatposts. From its hassle-free installation to smooth ball bearing action to engineered failure point, the lightweight ReMote solves many of the functional problems that come with other dropper lever designs. - Includes barrel adjuster for on-the-fly changes - Lever pivots on a 21mm ball bearing for smooth operation - Engineered break-away pivot that allows the lever to break away from the mount in the event of a crash - Cable Kind Clamp does not damage secured cables and features captive hardware - Integrates with SRAM/Avid MatchMaker X clamp-equipped brake levers for better ergonomics
Wolf Tooth Components ReMote Light Action Dropper Lever
$70.00
Wolf Tooth ReMote Light Action has a longer lever arm than the standard ReMote and is optimal for dropper posts with a harder pull or for riders that just prefer a really light actuation feel. It reduces the force to actuate a dropper by nearly a third of the standard ReMote. Based on rider feedback and tailored to work with some posts’ stiffer internal springs, the ReMote Light Action is also the choice of those with thumb injuries or reduced hand strength. - Upfront cable fixing - Large diameter ball bearing - Cable-kind clamp - Low-profile, light action - Integrated cable adjust - Breakaway axle pivot - High-traction lever - Broad compatibility
Wolf Tooth Components Seatpost Clamp
$25.00
The precision-engineered Wolf Tooth Seatpost Clamp secures your seatpost and looks good doing it. At the heart of the Wolf Tooth Seatpost Clamp is a custom self-aligning bolt and anchor. The M5 bolt includes spherical washer and mates with a cylindrical anchor barrel. This means that threads are always perfectly aligned, preventing binding and ensuring consistent clamping force. - M6 stainless steel bolt with integrated washer Tool interface - 4mm hex key
Wippermann Connex 900 9-Speed Derailleur Chain
$40.00
9-Speed Chains - Your All-Rounder Our 9-speed chains are compatible with all common road bike, touring bike and mountain bike gear systems. The innovative high-performance plate geometry gives all types of this series the very best gear-changing properties. And for highest resistance to wear and maximum strength, we have implemented an innovative process for radial riveting. Steel Value-priced with top performance: The standard model of the 9-speed chain series is robust and offers top gear-changing properties thanks to the high-performance plates. Always included with all 9-speed chains: the unique Connex Link. - Dimensions: 1/2" x 11/128" - Pin length: 6.60mm - Roller width: 2.20mm - Pin ejection pressure: >2000 N - Pin hardening: XHB - Links: 114 - Weight: 279g - For all 9-speed systems - Suitable for ATB/trekking, city/touring, mountain bike and road bike
Whisky Parts Co. No. 7 Mountain Stem
$50.00
Whisky's No.7 Mountain stems offer a stout connection for modern mountain bars. They match the simple, clean aesthetic of other Whisky cockpit components. - Bead-blasted, then anodized, finish - 3D-forged for increased strength, then CNC-machined - 4-bolt faceplate design for easy installation
Whisky Parts Co. No. 7 Stem
$40.00 - $45.00
Whisky's No.7 Stem is a lightweight stem with a clean aesthetic. Stems only have a few jobs to do: hold the bars, provide stable support, and look good. Ours does all three admirably. Paired with any of our handlebars, it rounds out the perfect Whisky cockpit. Available in a wide range of lengths to perfect your bike's fit and performance.
Whisky Parts Co. No. 9 Flat Bar
$150.00
Whisky's No.9 Flat Bar keeps your weight lower and more forward on the bike for a more aggressive riding position. It’s wide, sleek, and tested to the highest standards to deliver hours of reliable trail riding. Trimmable ends allow you to really dial in your fit to keep you comfortable every time your tires hit the dirt or snow.
Whisky Parts Co. No. 9 Riser Bar
$150.00
Whisky's No.9 Riser Bar features a 25mm rise and a 5-degree upsweep to offer a slightly more upright riding position that increases control and comfort. It’s wide, sleek, and tested to the highest standards to deliver a ride you can trust mile after mile. Trimmable ends allow you to really dial in your fit to keep you comfortable every time your tires hit the dirt or snow.
Whisky Parts Co. No.9 Mountain Carbon Handlebar 35.0
$165.00
The No.9 35.0 Mountain Carbon Handlebar is designed and built for the most extreme trail and all-mountain riding. The oversized stem clamp adds to front-end stiffness for precise input, while the carbon construction provides vibration damping in a lightweight and durable package. - Unidirectional carbon fiber construction - 35mm stem clamp - 8 degrees of backsweep with 5 degrees of upsweep - Trimmable ends, made easy with graphic markings - Rated to ASTM Condition 4 for extreme off-road riding
Wheels Manufacturing Inc. 386 EVO Adapter for 24mm Spindle Cranks
$54.00
The Wheels Manufacturing 386 EVO Adaptor for Shimano Hollowtech II Cranks adapts Shimano cranks to 386EVO-standard frames. Simply tap the adapters into the 6806 bearing in the BB shell or cups, then install the cranks using the included spacers to adjust chainline, or to take up any side-to-side movement in the crank. - Machined engineering-grade Delrin - 48g/pr Includes - (2) - 24mm ID adapters - (8 )- .7mm spacers
Wheels Manufacturing Inc. BB/PF30 Universal Adapter for 24mm Spindle Cranks (Shimano, FSA, etc.)
$42.00
Machined engineering-grade Delrin inserts for adapting bottom brackets to a different type of crankset spindle. - Adapts PF30 and Cannondale BB30-73A bottom brackets for use with Hollowtech II cranksets - Delrin adaptors fit between bearings and crank spindle - BB Shell Width (mm): 68 mm , 73 mm - Spindle Interface Type: Hollowtech II - BB/Frame Interface: PF30
Wheels Manufacturing Inc. BB30 ABEC-3 Bearings & Clip Kit
$39.00
BB30 service kit includes 2 Enduro 6806 ABEC-3 sealed bearings and 2 retaining clips. - Bearing Dimensions: OD: 42mm / ID: 30mm / Width: 7mm - Direct replacement bearing for OEM BB30 and BB30A systems - Enduro ABEC-3 bearings
Wheels Manufacturing Inc. BB30 Outboard ABEC-3 BB
$74.00 - $99.00
The Wheels Mfg BB30 Outboard bottom bracket will give you all of the same benefits as their other Outboard style BBs. The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Specifically designed for installing 24mm spindle diameter cranks (Shimano, FSA, Etc.) in BB30 frames without the need for adapters. - Bearings: Enduro ABEC-3 - Color: Red - Bottom Bracket/Frame Interface: BB30, Specialized Alloy OSBB - Bottom Bracket Shell Width (mm): 68mm - 73mm - Bottom Bracket Shell I.D.: 42mm - Crank Spindle Type: Shimano Hollowtech II, FSA MegaExo, RaceFace EXI - Crank Spindle Diameter: 24mm - Weight: 130g
Wheels Manufacturing Inc. BB30 Outboard Angular Contact Bottom Bracket
$99.00 - $120.00
The Wheels Mfg BB30 Outboard bottom bracket will give you all of the same benefits as their other Outboard style BBs. The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Specifically designed for installing 24mm spindle diameter cranks (Shimano, FSA, Etc.) in BB30 frames without the need for adapters. - Bearings: Enduro Angular Contact - Color: Red - Bottom Bracket/Frame Interface: BB30, Specialized Alloy OSBB - Bottom Bracket Shell Width (mm): 68mm - 73mm - Bottom Bracket Shell I.D.: 42mm - Crank Spindle Type: Shimano Hollowtech II, FSA MegaExo, RaceFace EXI - Crank Spindle Diameter: 24mm - Weight: 127g
Wheels Manufacturing Inc. BB30A Outboard ABEC-3 Bottom Bracket
$99.00
The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life and simplifying maintenance. Enjoy smooth operation, fast bearing replacement, and no more creaking. - Bearings: Enduro ABEC-3 - Color: Black - Bottom Bracket/Frame Interface: Cannondale BB30A - Bottom Bracket Shell Width: 73mm - Bottom Bracket Shell I.D.: 42mm - Over Bearing Width: 91mm in 73mm wide shell (dimensions include supplied silicone dust shields) - Tool Pattern: 44mm x 16 notch
Wheels Manufacturing Inc. BB30a/PF30a/BBright Adapter for 24mm Spindle Cranks
$54.00
Wheels Manufacturing BBRIGHT BB30A and PF30A Adaptor for 24mm Spindle Cranks adapts 24mm spindle cranks (Shimano, FSA, etc.) to most BBRight frames. Compatible with 2011-2012 Cervelo models R3, R3 Team, S5, S5 Team, S5 VWD, R5ca and R5 VWD. - Also adapts Cannondale BB30a and PF30a frames to 24mm spindle cranks (Shimano, FSA, etc.). - Includes eight 0.7mm shims for fine-tuning chain line - Machined engineering-grade Delrin - 48g/pr
Wheels Manufacturing Inc. BBbright Outboard Angular Contact Bottom Bracket
$120.00
BBRight™ Outboard bottom bracket for use with 24mm spindle diameter cranksets. The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. - Bearings: Enduro Angular Contact - Color: Black - Bottom Bracket/Frame Interface: BBRight™ Press Fit - Bottom Bracket Shell Width (mm): 79mm - Bottom Bracket Shell I.D.: 46mm - Crank Spindle Type: Shimano Hollowtech II, FSA MegaExo, RaceFace EXI - Crank Spindle Diameter: 24mm - Weight: 146g
Wheels Manufacturing Inc. Derailleur Hanger 102
$22.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Wheels Manufacturing Inc. Derailleur Hanger 103
$40.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Wheels Manufacturing Inc. Derailleur Hanger 11
$27.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Wheels Manufacturing Inc. Derailleur Hanger 110
$22.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x10 Flat Head Screws
Wheels Manufacturing Inc. Derailleur Hanger 12
$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x10 Socket Head Cap Screws
Page 1 of 140 Next page