Zipp's Tangente Cork Brake Pads are perfect for Zipp wheels with carbon braking surfaces. They are made of a composite cork polymer for consistent brake response and to reduce glazing from the intense heat caused by braking on carbon. As a result, the Tangente cork pads avoid the brake pulsation produced by residue buildup from rubber pads and can even eliminate pulsation from rims with previous buildup. These pads have a unique shape with more material in the front to improve durability and shed water. Although the composite material wears similarly to low-temperature rubber compounds, the Tangente cork pads last longer than most rubber carbon-specific pads because of the shape and 0.5 mm greater overall thickness.
Zipp's Tangente Platinum Pro Evo Brake Pads are made for wheels with carbon braking surfaces. These fine pads provide confident, smooth braking power in all conditions and they are specially made for long life. They have a large surface area for maximum stopping power and deep grooves to shed water from the rim and ensure the Evos grip great even when it's wet. These stoppers are also thin so they'll work nicely on time trial and triathlon bicycles with integrated brakes and tight clearances.
In 2016, TRP began working with reigning world cup champion, Aaron Gwin, to redesign our DH-R EVO brakes. Out of the gate, he was impressed with the initial level of performance, but he did have a list of improvements needed to achieve world cup-winning performance. Working closely with the TRP development team, improvements were made in nearly every part of the brake and tested on the world cup circuit throughout the season. We took most of the changes made to the DH-R EVO brakes and put them into the Slate T4. This brake features the same ergonomic lever made from cast aluminum and a forged/CNC'd caliper, both of which were given a matte black finish. It also features a new and stiffer 5.0mm hose for easier internal routing and better transfer of hydraulic power. Riders will also find benefits in the four-piston caliper, tool-free reach adjust, and top-loading caliper. NEW CNC ADAPTERS - CNC machined - Increased stiffness and clean fit - Simple information marking NEW BRAKE PADS - New performance resin compound - Increased thermal stability - Shorter bed-in process NEW MINERAL OIL - Lower viscosity for better fluid flow - Increased heat stability up to 230 oC - Easier to bleed ERGONOMIC LEVER BLADES - Lightweight aluminum body - Ergonomic single finger positioning - Dimpled accents for better grip on the trail NEW 5MM HYDRAULIC HOSE - Increased stiffness for better hydraulic pressure - Increased thermal stability - Easier to work with for internal frame routing
The Shimano BL-MT200 Hydraulic Disc Brake Lever and BR-MT200 Disc Brake Caliper - Brakes are pre-bled - Hydraulic hose included - Rotor not included
Shimano Alivio hydraulic disc brake sets offer reliable and powerful braking, along with pre-bled hoses for convenient installation. - BL-MT200 hydraulic disc brake lever - BR-MT200 hydraulic disc brake caliper - Rotor sold separately
$23.99 - $30.00
This Shimano Alivio BL-T4000 V-Brake Lever Set is compatible with all long-pull brakes, including linear-pull brakes and mountain-style mechanical disc brakes. - Compatible with V-brakes and MTB mechanical disc brakes - Adjustable reach - Brake Lever Use: Pair - Cable Head: Mountain - Brake Lever Actuation: Long Pull
Put supreme control right at your fingertips with Shimano's Deore Three-Finger V-Brake Levers. Ergonomic lever blades are comfortable and easy to use. The internal bumper offers silent lever return, and the reach can be adjusted to fit your hands.
• 140mm CenterLock Ice-Tech Rotor • Aluminum core construction • Lowers operating temperature • Resists power fade • Increases pad life
Shimano's Deore XT Ice-Tech rotors utilize the industry standard 6-bolt mounting system for secure mounting. These rotors use an aluminum core with steel outer plates to better control the temperature of the braking surface. This means quieter braking and, more importantly, less fade on long downhills and improved pad life. The various sizes give you total freedom of choice over the delicate balance of power versus weight.
With a focus on reduced weight and cross-country tuned stopping power, Shimano Deore XT brakes provide intuitive modulation so that you can explore your limits with confidence. The levers feature an optimized lever axle position, refined ergonomics, and increased rigidity thanks to an additional handlebar contact point. The BR-M8120 4-piston calipers are designed for tough enduro trails and include heat-dissipating finned metal pads. - 10% stiffer than previous generation M8000 even under high-temp conditions - Quicker brake engagement with a shorter free stroke - Tool-free reach adjustment - Free stroke adjustment - I-SPEC EV Clamp Band - Brakes are pre-bled for convenient installation
Shimano's XT Ice-Tech rotors utilize their patented Center Lock mounting system for super quick and easy mounting. These rotors use an aluminum core with steel outer plates which reduces the temperature of the braking surface. This means quieter braking, and more importantly, less fade on long downhill sections and improved pad life. The various sizes give you total freedom of choice over the delicate balance of power versus weight.
Shimano M03 Metal Disc Brake Pads - OEM pad for XT BR-M755 caliper - Sintered Metal pad with consistent, high stopping power in wet or dry conditions and excellent durability
Shimano G04S metal disc brake pads. - Fits XTR BR-M9000, BR-M9020, BR-M985, XT BR-M8000, BR-M785, SLX BR-M666, Alfine BR-S700 and BR-R785, BR-RS785 road disc calipers - Sintered Metal pad with consistent, high stopping power in wet or dry conditions and excellent durability - Ventilated steel backing plate for improved heat dispersion - Backing Plate Material: Steel - Compound: Metal
$61.00 - $67.99
Shimano Deore XT RT-MT800 Center Lock disc brake rotors feature an advanced heat-dissipating design. - Rotor construction uses Shimano Freeza technology to boost heat dissipation and reduce fade - Quick and easy installation with spline mount and lock ring (included) - Compatible with metal and resin pads
Shimano XT RT81 Centerlock Disc Rotors - 3-layer structure with aluminum core and two stainless steel outer layers reduces rotor surface temperature approximately 100 degrees Celsius compared to all-steel rotors - Aluminum spider - Includes standard type rotor lockring - Requires external-type rotor lockring when installing onto 15/20mm axle hub
- Pair of J-Type disc brake pads with fins, for 1 caliper - Available with resin or metallic compound - Fits 2-piston SLX and XT calipers from 10 to 12 speed groups and 10 or 11 speed XTR brakes - Ice Technologies fins & aluminum backplate cools down the brakes in use, which improves braking consistency and power and reduces brake fade during long, technical dowhnill stretches - Longer lasting than G-type pads - Interchangeable with F-Type and G-Type pads - Includes spring and pin
- Pair of L-Type brake pads with fins, for one caliper - Ice Technologies fins & aluminum backplate cools down the brakes in use, which improves braking consistency and power and reduces brake fade, especially in long descents - Choice of compound: Resin, for improved modulation & lower noise, or Metallic, for improved durability & higher braking power in muddy conditions - Longer lasting than K-Type pads - Interchangeable with K-type finless pads - Fits all Shimano flat mount gravel & road disc calipers, including Dura Ace BR-R9170, Ultegra BR-R8070, 105 BR-R7070, GRX BR-RX810 and BR-RX400 - NOT compatible with XTR BR-M9100
Shimano Replacement pads for Mountain brake shoes - Shimano Cartridge-type mountain brake pads fit models: XTR BR-M970, BR-M960, BR-M951, BR-M950 XT BR-T780, BR-M770, BR-M760, BR-M750, BR-M739, BR-M737 LX BR-T670, BR-M580, BR-M570 Deore BR-M530, BR-M510 Alivio BR-M430, BR-MC18 Acera BR-M422, BR-M421, BR-M420, BR-M330, BR-T300 DXR BR-MX70 MX BR-M600 - M70CT4: Only for sidewall-machined rims; performs especially well in wet conditions and may pass DIN standard; tends to be low noise, low rim wear and fade - Color: Black - Intended Brake Type: Linear Pull - Pad Attachment Style: Threaded Post - Pad Type: Replacement Insert - Cartridge - Rim Compatibility: Standard
With a focus on reduced weight and cross-country tuned stopping power, Shimano SLX M7100 brakes provide intuitive modulation so that you can explore your limits with confidence. The BL-M7100 levers feature an optimized lever axle position, an additional handlebar contact point for greater stiffness, and refined ergonomics for rider comfort. At the caliper end, the BR-M7100 2-piston caliper provides lightweight braking performance and is combined with quicker piston retraction. - 10% stiffer than previous generation M7000 even under high-temp conditions - Quicker brake engagement with shorter free stroke - Tool-free lever reach adjustment - I-SPEC EV Clamp Band enables optional integrated shifter setup
With a focus on reduced weight and cross-country tuned stopping power, Shimano SLX M7120 brakes provide intuitive modulation so that you can explore your limits with confidence. The BL-M7100 levers feature an optimized lever axle position, an additional handlebar contact point for greater stiffness, and refined ergonomics for rider comfort. At the caliper end, the BR-M7120 4-piston caliper is optimized for the toughest enduro trails. - 10% stiffer than previous generation M7000, even under high-temp conditions - Quicker brake engagement with shorter free stroke - Tool-free lever reach adjustment - I-SPEC EV Clamp Band enables optional integrated shifter setup - Includes finned metal pads
Shimano's SLX Disc Brakes are strong, powerful, and easily modulated. SLX post-mount calipers use two oversize ceramic pistons for impressive power that's easy to roll on and off. Ceramic pistons and finned ICE-Tech pads prevent heat buildup so you get consistent braking with no fade, even on long descents. One way bleeding gives you quick, easy maintenance and comfortable single-digit levers with reach adjust let you dial in the performance for your hands.
Shimano Saint hydraulic disc brakes feature an opposed ceramic 4-piston design which helps absorb rotor heat and reduce vibrations. The Servo Wave 2-finger levers feature tool-free stroke and position adjustment, while the one-way bleeding caliper and hinged lever clamp offer easy installation and maintenance. - Brakes are pre-bled for convenient installation - Includes metal ICE TECH pads with radiator fins - I-spec B-type shift lever compatible
$76.99 - $79.99
Shimano Ultegra R8070 flat mount hydraulic disc brake caliper. - Model Number: BR-R8070 - Brake Type: Hydraulic disc brake - Average Weight: 280 g/pair - Greater rider control in all conditions - Hydraulic disc brake provides the next stage of control - Sleek integration into a road bike's aero profile - Designed to integrate seamlessly with a road bike's profile - Flat mount hydraulic type - Better heat dispersion than current road disc systems (SM-RT800) - New construction provides better heat management than current ICE TECHNOLOGIES FREEZA
Deore XT M8100 hydraulic disc brakes are designed to provide high-performance braking for a variety of MTB riding styles. - BL-M8100 features a stiffer brake lever design that provides added support for aggressive riding - Servo Wave Action technology means quicker brake engagement with shorter free stroke - The BR-M8120 4-piston caliper is designed for tough enduro trails - Set includes brake lever, caliper, finned metal pads, and hose - Brakes are pre-bled for convenient setup
The Deore XT M8100 hydraulic disc brake is designed to provide high performance braking for a variety of MTB riding styles. Includes the brake lever and disc brake caliper. - BL-M8100 features a stiffer brake lever design that provides added support for aggressive riding - Servo Wave Action technology means quicker brake engagement with shorter free stroke - The BR-M8100 2-piston brake caliper is optimized for cross country riding styles - Includes finned metal pads and hose - Brake Caliper Type: Post Mount - Hydraulic Hose Length: 1000mm (Front) / 1700mm (Rear) - Hydraulic Fluid Type: Mineral Oil - Rotor Included: No - Pad Compound: Metallic
$43.00 - $55.00
- XT-grade 6-bolt rotor - Stainless steel braking surface for long lasting durability - Cutouts help with mud clearing and cooling - Large forged alloy spider supports rotor surface, increasing rigidity and heat dissipation while reducing weight - Comes complete with mounting hardware
$77.00 - $84.00
SRAM's CenterLine rotors are light-weight, quiet, smooth and robust, featuring a two-piece design with an aluminum center and steel brake track.
$44.00 - $59.00
Stainless steel rotor designed for smooth and quiet braking with any disc brake caliper.
The SRAM CenterLine XR (CLX-R) rotor works in tandem with the SRAM eTap AXS drivetrain. It's designed specifically for road riding — and to keep braking quiet at every stop. - Streamlined form optimized for road use - CenterLine track offers quiet brake operation - Two-piece design reduces weight
$35.00 - $65.00
The CenterLine design provides a smooth, consistent, and quiet running braking surface. Rounded edges make for easier wheel installs and are UCI-compliant. - Compatible with both road and mountain bike brakes - Rounded edges are UCI-compliant and allow for easier wheel installs - Hub interface: CenterLock - Rotor Type: Centerline
Page 1 of 23 Next page